1X8 0.9mm Sc/APC Blockless Mini Optical Fiber PLC Splitter

Optical Fiber 1x4 PLC Splitter is fabricated using silica optical waveguide technology to distribute the optical signals to 4 signals. It's widely used in PON, ODN, FTTX point to connect between termination device and central office to achieve the signal splitter.

Send Inquiry

Optical Fiber 1x4 PLC Splitter

1x4 PLC Splitter is fabricated using silica optical waveguide technology to distribute the optical signals to 4 signals. It's widely used in PON, ODN, FTTX point to connect between termination device and central office to achieve the signal splitter.

Type	1x4
Operating wavelength(nm)	1260-1650
Insertion loss (dB)	Typical7.2
Maximum	7.5
Uniformity (dB)	Typical0.5
Maximum	0.6
Polarization Dependent Loss (dB)	Typical0.1
Maximum	0.15
Wavelength dependent loss (dB)	Typical0.1
Maximum	0.3
Return loss (dB)	Minimum 55/50
Directivity (dB)	Minimum 55
Operating temperature (℃)	-20 to 85
Storage temperature (℃)	-40 to 85
Optical fiber type	SMF-28 Or customer required
Optical fiber length (m)	1 or customize

The inner structure of the PLC Splitter

product-1-1

PLC Splitter is one of the most important passive components in the optical fiber link. It is an optical fiber splicing device with many terminals and many output terminals. Among them, the design and assembly of the three most important components, the input, output and chip of the optical fiber array, play an important role in the stable and normal operation of the PLC Splitter.

Some advantages of our PLC Splitter