Knowledge

MTP/MPO converted fiber jumper has the same fan-out structure as MTP/MPO branch fiber jumper, but the number and type of fiber are different. MTP/MPO

Since the construction of the data center computer room carries the transmission of the entire communication data, the comprehensive wiring of the com

FTTR (Fiber to The Room) refers to the basic technical method for fiber access when the fiber is laid to the remote node.

In traditional 10G and 40G LAN networks, operators choose fixed passive filter technology or ROADM technology to deploy optical networks. Passive filt

Compared with the active DWDM backbone network equipped with fiber amplifiers and dispersion compensators, passive DWDM can construct high-speed trans

In 5G fronthaul networks, 25G optical SFP modules are widely used, especially 25G WDM optical SFP modules. Because this kind of optical SFP modules ca

In the transmission of optical fiber systems, active Optical SFP Module are fast-moving consumer goods after all, so it is very common for them to mal

As we all know, Optical SFP Module are a kind of fast-moving consumer goods. What are the common problems in the use of Optical SFP Module? After anal

As we all know, DWDM technology can transmit dozens of wavelengths in a single optical fiber, which greatly expands the transmission capacity of optic

200G QSFP56 and 200G QSFP-DD are two mainstream solutions for 200G optical interconnection. QSFP56 uses mainstream digital signal processors (DSP) to

There are many different wavebands in the transmission process of optical fiber, such as C-band (1530nm-1560nm) and L-band (1560nm-1600nm). Because of

The 10G DAC high-speed cable is different from the 10G AOC high-speed cable, which is reflected in the following aspects: 1. Anti-electromagnetic inte