OPTICO's AWG CWDM4 module is based on silicon-based chip technology, has a compact, easy-to-assemble structure and good reliability. It can replace TFF (thin film filter) CWDM and is widely used in 40G and 100G high-speed active optical modules Multiplexing and demultiplexing of optical signals, such as QSFP+, QSFP28, etc.
| 40CH 100G Thermal AWG | ||||
| Parameter | Specification | |||
| MIN | Typical | Max | ||
| Number of Channels | 40 | |||
| Number Channel Spacing（GHz） | 100 | |||
| Cha. Center Wavelength（nm) | C-Band | |||
| Clear Channel Passband(nm) | ±0.1 | |||
| Wavelength Stability（nm） | ±0.005 | |||
| -1dB Channel Bandwidth (nm) -1dB | 0.4 | |||
| -3 dB Channel Bandwidth（nm） -3dB | 0.6 | |||
| Optical Insertion Loss at ITU grid（dB）@ITC Grid | 4.5 | 6 | ||
| Isolation（dB) | Adjacent | 25 | ||
| Non-Adjacent | 30 | |||
| Total Channel | 22 | |||
| Insertion Loss Uniformity（dB | 1 | 1.5 | ||
| Directivity (Mux Only)（dB） (Mux Only) | 40 | |||
| Insertion Loss Ripple（dB) | 0.5 | |||
| Optical Return loss（dB） | 40 | |||
| PDL/Polarization Dependent Loss in Clear Channel Band（dB | 0.3 | 0.5 | ||
| Polarization Mode Dispersion（ps） | 0.5 | |||
| Maximum Optical Power（mW） | 23 | |||
| MUX/DEMUX input/ output Monitoring range(dB/℃) | -35 | 23 | ||
| Operating Temperature(℃) | -5 | 25 | 65 | |
| Operating Humidity(%RH) | 5 | 95 | ||
| Storage Temperature(℃) | -40 | 85 | ||
| Storage Humidity(%RH) | 5 | 95 | ||
| Package Size(mm) | L150×W65×H16 | |||
| Size between screws(mm) | 140 x 58 | |||
| Remarks: | ||||
| *1.All parameters are without connectors | ||||
| *2.Connector Loss: 0.2dB/each added | ||||
Sufficient working bandwidth (effectively meet the problem of high and low temperature wavelength drift)
High-quality uniformity (smaller channel uniformity)
Compact design (a perfect combination of compact size and microbend fiber)
In line with international standards
Optical module transmitter (TOSA)
Receiver (ROSA), widely used in 40G, 100G high-speed active optical modules for optical signal multiplexing and demultiplexing, such as: QSFP+, QSFP28
OPTICO's AWG CWDM4 module complies with RoHS and meets Telcordia GR-1209-CORE and GR-1221-CORE.
Hot Tags: awg cwdm4 module, China, manufacturers, suppliers, factory, wholesale, customized, 6 port CWDM DWDM, dwdm standard, Single Fiber CWDM mux, cwdm fiber optic multiplexers, CWDM LGX Modules, Networks Fiber Optic CWDM LGX Module
| 40CH 100G Thermal AWG | ||||
| Parameter | Specification | |||
| MIN | Typical | Max | ||
| Number of Channels | 40 | |||
| Number Channel Spacing（GHz） | 100 | |||
| Cha. Center Wavelength（nm) | C-Band | |||
| Clear Channel Passband(nm) | ±0.1 | |||
| Wavelength Stability（nm） | ±0.005 | |||
| -1dB Channel Bandwidth (nm) -1dB | 0.4 | |||
| -3 dB Channel Bandwidth（nm） -3dB | 0.6 | |||
| Optical Insertion Loss at ITU grid（dB）@ITC Grid | 4.5 | 6 | ||
| Isolation（dB) | Adjacent | 25 | ||
| Non-Adjacent | 30 | |||
| Total Channel | 22 | |||
| Insertion Loss Uniformity（dB | 1 | 1.5 | ||
| Directivity (Mux Only)（dB） (Mux Only) | 40 | |||
| Insertion Loss Ripple（dB) | 0.5 | |||
| Optical Return loss（dB） | 40 | |||
| PDL/Polarization Dependent Loss in Clear Channel Band（dB | 0.3 | 0.5 | ||
| Polarization Mode Dispersion（ps） | 0.5 | |||
| Maximum Optical Power（mW） | 23 | |||
| MUX/DEMUX input/ output Monitoring range(dB/℃) | -35 | 23 | ||
| Operating Temperature(℃) | -5 | 25 | 65 | |
| Operating Humidity(%RH) | 5 | 95 | ||
| Storage Temperature(℃) | -40 | 85 | ||
| Storage Humidity(%RH) | 5 | 95 | ||
| Package Size(mm) | L150×W65×H16 | |||
| Size between screws(mm) | 140 x 58 | |||
| Remarks: | ||||
| *1.All parameters are without connectors | ||||
| *2.Connector Loss: 0.2dB/each added | ||||
