ADSS Fiber Cable Double Jacket 96 Core
The all-dielectric self-supporting optical cable (ADSS) is metal-free, tension-resistant, self-supporting, high-insulation, non-inductive, thin, light, easy to construct and economical. It is a combined optical cable made by winding optical fiber bundles around the central reinforcement and subjected to protection measures such as insulation, waterproofing, reinforcement, and sheathing.
Place of Origin: Shenzhen, China
Brand Name: OPTICO
Model Number: OP-ADSS-96F-2D
Number of Conductors: ≥ 10
Product Name: ADSS Fiber Cable Double Jacket 96 Core
Jacket: PE/AT
Color: Black
Large Span: Over 1000m
Life Expectancy: Over 30 years
Application: Aerial
Operating Temperature: -40°C to+70°C
Standard: IEC 6079-1; IEEE 1222-2004
Strength Material: Kevlar
Fiber Count: 96 Cores or customized
Supply Ability: 30000 km/month
Packing: wooden drum
Port: Shenzhen
Double Layer Aerial ADSS Cable is used for communication cable of overhead high-voltage electricity transmission system,it also can be used as communication cable at the areas where lighting is frequent or distance is big.
ADSS cable is loose tube stranded. Fibers, 250μm , are positioned into a loose tube made of high modulus plastics. The tubes are filled with a water-resistant filling compound. The tubes (and fillers) are stranded around a FRP (Fiber Reinforced Plastic) as a non-metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound. it is covered with thin PE (polyethylene) inner sheath. After stranded layer of aramid yarns are applied over the inner sheath as strength member, the cable is completed with PE or AT (anti-tracking) outer sheath.
Features:
1. Can be installed without shutting off the power
2. Excellent AT performance. The maximum inductive at the operating point of AT sheath can reach 25kV
3. Light weight and small diameter reducing the load caused by ice and
wind and the load on towers and upholder
4. Large span lengths and the largest span is over 1000m
5. Good performance of tensile strength and temperature
6. The design life span is 30 years
7.The actual status of overhead power lines is taken into full consideration when ADSS cable is being designed.
8.For overhead power lines under 110kV, PE outer sheath is applied.
9.For power lines equal to or over 110kV. AT outer sheath is applied.
10.The dedicate design of aramid quantity and stranding process can satisfy the demand on various spans.
Applications:
1,Outdoor aerial applications
2,Low voltage transmission system(≤12 kV)
3,Railway & Telecommunication pole route
4,Subscriber & Local Area Network
5,Voice, data, video & imaging system
The color of marking is white, but if the remarking is necessary, the white color marking shall be printed newly on a different position.
An occasional unclear of length marking is permitted if both of the neighboring markings are clear.
The both cable ends are sealed with heat shrinkable end caps to prevent water ingress
Main mechanical & environmental performance test
Item | Test Method | Acceptance Condition |
Tensile Strength | - Load: Short term tension | - Fiber strain £ 0.15% |
Crush Test | - Load: Short term crush | - Loss change £ 0.05dB@1550nm |
Impact Test | - Points of impact: 3 | - Loss change £ 0.1dB@1550nm |
Temperature Cycling Test | - Temperature step: | - Loss change £ 0.05 dB/km@1550 nm |
Certificates
Factory Workshop
Keyworks: ADSS fiber cable, self-support, aerial dielectric fiber cable;
Hot Tags: adss fiber cable double jacket 96 core, China, manufacturers, suppliers, factory, wholesale, customized, SC Fiber Connectors, Aerial Fiber Optical Cable, Indoor Fiber Optical Cable, Direct Buried Fiber Optical Cable, Fiber Optic Jumper, DUCT Fiber Optical Cable