12F MTP MPO Female OM4 Loopback
OPTICO optical fiber MPO/MTP optical fiber loopback modules are widely used in test environments, especially in 40/100G network communications. This product is used for signal return in test systems or network systems, through return signals (mainly in pairs From the TX transmitting end to the receiving end of the RX, various potential abnormalities are located, so as to achieve effective testing and evaluation of individual components or interfaces and networks on the optical fiber network-including 40GBASE-SR4 QSFP+ or 100GBASE-SR10 CXP/ CFP Optical module.
Advantage:
Standard MTP connector
The new fiber optic ring is lighter and takes up less space
Each loopback module is equipped with a dust plug to effectively prevent external pollution
Application：
With 40G/100G optical module
Fiber test
Network repair
Diagnose equipment failure
Test the transmitted optical power and receiving sensitivity
Details of our production
Types of our certificates
We can promise the safty of your product
The MPO/MTP looper can speed up the IL test of the optical fiber network by connecting to the MPO/MTP backbone jumper.
If you interested,just kindly let me know!
Hot Tags: 12f mtp mpo female om4 loopback, China, manufacturers, suppliers, factory, wholesale, customized, LC UPC Duplex SM Loop Back, 12F MTP MPO Female OM4 Loopback, Fiber Connectors, 12F MTP MPO Female SM Loopback
| Fiber Optic Loop Back | |
| Style | LC,SC,ST,FC.MU,MPO, SC/APC,FC/APC,LC/APC.MU/APC Duplex MTRJ/Female, MTRJ/Male |
| Fiber Type | 9/125 SMF-28 or equivalent (Singlemode) OS1 50/125, 62.5/125 (Multimode) OM2&OM1 50/125, |
| 10G (Multimode) OM3 | |
| Cable Type | Simplex, Duplex (Zipcord) Φ3.0mm, Φ2.0mm, Φ1.8mm Φ1.6mm PVC or LSZH Φ0.9mm, Φ0.6mm buffered fiber |
| PVC or LSZH | |
| Polishing Manner | UPC, APC (8°& 6°) |
| Insertion Loss | ≤ 0.2dB (For Singlemode Master) ≤ 0.3dB (For Singlemode Standard); ≤ 0.5dB (For Multimode) Tested by JDS RM 3750 |
| Return Loss (For Singlemode) | UPC ≥ 50dB, APC ≥ 60dB (typ.65dB) |
| Durability | ±0.2dB typical change,1000 matings |
| Interchangeablity | ≤ 0.2dB |
| Operating Temperature | -40°C to 85°C |
| Storage Temperature | -40°C to 85°C |
| Geometry Requirement (For Singlemode) |
Ferrule Endface Radius 7mm ≤ R ≤ 12mm (For APC) 10mm ≤ R ≤ 25mm (For Standard) Apex Offset ≤ 30 μm (For Master) Apex Offset ≤ 50 μm (For Standard) Undercut -50nm ≤ U ≤ 50nm |
