10G SFP Transceiver 80km LC
The SFP optical module is a small hot-swap module in the SFP package with a maximum rate of 10.3G and an interface of LC. SFP optical modules are mainly composed of lasers. SFP classification can be divided into rate classification, wavelength classification, and pattern classification.
A 10G optical module is an optical module that can transmit 10G of information per second.
Place of Origin: Shenzhen, China
Brand Name: OPTICO
Model Number: OP-SFP-10G-CWDM-80KM
Product name:10G CWDM SFP+ Module 80km 1260-1610nm
Max Cable Distance: 80km
Data rate: 10G
Wavelength: 1260-1610nm
Compatible: Cisco , Huawei , Juniper , Alcatel
Chipset: Avago MAXIM Sumitomo
Warranty: 3 years
Optical Connector: LC
Supply Ability: 20000 pcs/month
OPTICO SFP+ CWDM transceiver is expected to send and receive optical data via single-mode fiber, with a connection length of 80 km.
The receiver part consists of a PIN photodiode integrated with TIA. All modules meet Class I laser safety requirements. The digital diagnostic function is available through the 2-wire serial interface specified in SFF-8472. This interface allows real-time access to device operating parameters such as transceiver temperature, laser wavelength, transmitted optical power, received optical power, and transceiver power supply voltage.
Parameters:
| Transmitter | ||||||
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Operating Wavelength | xx | nm | 4 | |||
| Ave.output power(Enabled) | Po | 0 | 5 | dBm | 1 | |
| Extinction Ratio | ER | 4.5 | dB | 1 | ||
| RMS spectral with | △λ | 1 | nm | |||
| Rise/Fall time(20%~80%) | Tr/Tf | 50 | ps | 2 | ||
| Optical modulation amplitude | OMA | -6.2 | dBm | |||
| Dispersion penalty | 1 | dB | ||||
| Output Optical Eye | Compliant with IEEE 0802.3ae | |||||
| Receiver | ||||||
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Operating Wavelength | 1260 | 1610 | nm | |||
| Sensitivity | Psen | -24 | dBm | 3 | ||
| Min.overload | Pimax | -7 | dBm | |||
| LOS Assert | Pa | -32 | dBm | |||
| LOS De-assert | Pd | -25 | dBm | |||
| LOS Hysteresis | Pd-Pa | 0.5 | 4 | dB | ||
Feature:
Compliant with SFF-8431,SFF-8432 and IEE802.3ae
Cooled EML transmitter and PIN receiver
Wavelength selectable to ITU-T standards covering CWDM grid wavelengths Digital Diagnostic Monitor Interface
Hot pluggable
link length up to 80km
10GBASE-ER, and 2G/4G/ 8G/10G Fiber Channel applications
Low power consumption
Operating case temperature: 0 to 70 °C
CWDM Networks
Applications:
10GBASE-LR at 10.3125Gbps
Other optical links
10G Ethernet
10G SFP Precautions For Use:
1,Pay attention to whether the wavelengths and transmission distances of the optical modules used by the switches at both ends are the same, and the problems of single-fiber dual-fiber and single-mode multimode. If the two ends are not equal, the corresponding converter should be used;
2,When using the optical module, try to avoid static electricity and bumps. If bumps occur, it is not recommended to continue using the optical module;
3,Note that the front and back of the optical module are inserted, and the pull ring and label should face upward;
4,When inserting the optical module into the switch, push it as hard as possible to the bottom, there will generally be a slight sense of vibration. After insertion, you can gently pull out the optical module to check whether it is installed in place;
5,When disassembling the optical module, first pull the bracelet to a position 90° from the optical port, and then pull out the optical module;
Certificates:
Factory Workshop:
Keywords: 10G SFP, SFP Transceiver 80km, optical fiber device;
Hot Tags: 10g sfp transceiver 80km lc, China, manufacturers, suppliers, factory, wholesale, customized, sfp 10g sr support 1g, 10g sr s, 1 25G SFP 1310nm 40km DOM Transceiver Module, 10km SFP Transceiver, sfp 10g sr buy, 1310nm multimode SFP transceiver
